Ir al contenido principal

Top 5 Linux DVD RIP Software


DVD ripper software allows you to copying the content of a DVD to a hard disk drive. You transfer video on DVDs to different formats, or make a backup of DVD content, and to convert DVD video for playback on media players, streaming, and mobile phone. A few DVD rippers software can copy protected disks so that you can make discs unrestricted and region-free.

Please note that most of the following programs can rip encrypted DVDs, as long as you have libdvdcss2 installed as described here. Please check the copyright laws for your country regarding the backup of any copyright-protected DVDs and other media.

#1: AcidRIP

AcidRip is an automated front end for MPlayer/Mencoder (ripping and encoding DVD tool using mplayer and mencoder) written in Perl, using Gtk2::Perl for a graphical interface. Makes encoding a DVD just one button click! You can install it as follows under Debian / Ubuntu Linux:
$ sudo apt-get install acidrip
Fig.01: Linux Ripping And Encoding DVD's With AcidRip Software
Fig.01: Linux Ripping And Encoding DVD's With AcidRip Software

On the Preview tab you can choose to watch a bit of a preview of the resulting movie:
Fig.02: Preview your DVD rip
Fig.02: Preview your DVD rip

And when you are ready, click the Start button to rip DVDs.
=> Download acidrip

#2: DVD::RIP

dvd::rip is a full featured DVD copy program written in Perl i.e. fron end for transcode and ffmpeg. It provides an easy to use but feature-rich Gtk+ GUI to control almost all aspects of the ripping and transcoding process. It uses the widely known video processing swissknife transcode and many other Open Source tools. dvd::rip itself is licensed under GPL / Perl Artistic License. You can install dvd::rip as follows under Debian / Ubuntu Linux:
$ sudo apt-get install dvdrip
Fig.03: dvd::rip in action
Fig.03: dvd::rip in action

You need to configure dvd::rip before you actually start a project. See the documentation for more information.
=> Download dvd::rip

#3: HandBrake

HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows. It can rip from any DVD or Bluray-like source such as VIDEO_TS folder, DVD image, real DVD or bluray (unencrypted -- removal of copy protection is not supported), and some .VOB, .TS and M2TS files. You can install HandBrake under Debian or Ubuntu Linux as follows:
$ sudo apt-get install handbrake-gtk
Fig.04: HandBrake in action
Fig.04: HandBrake in action

=> Download HandBrake

#4: k9copy

K9copy is a KDE DVD Backup tool. It allows the copy of a DVD9 to a DVD5. It is also known as a Linux DVD shrink. It supports the following features:
  • The video stream is compressed to make the video fiton a 4.7GB recordable DVD
  • DVD Burning
  • Creation of ISO images
  • Choosing which audio and subtitle tracks are copied.
  • Title preview (video only)
  • The ability to preserve the original menus.
To install k9copy, enter:
$ sudo apt-get install k9copy
Fig.05: k9copy - Linux dvd shrink in action
Fig.05: k9copy - Linux dvd shrink in action

=> Download k9copy

#5: thoggen

thoggen is a DVD backup utility ('DVD ripper') for Linux, based on GStreamer and Gtk+ toolkit. Thoggen is designed to be easy and straight-forward to use. It attempts to hide the complexity many other transcoding tools expose and tries to offer sensible defaults that work okay for most people most of the time. It support the following features:
  • Easy to use, with a nice graphical user interface (GUI).
  • Supports title preview, picture cropping, and picture resizing.
  • Language Selection for audio track (no subtitle support yet though).
  • Encodes into Ogg/Theora video.
  • Can encode from local directory with video DVD files.
  • Based on the GStreamer multimedia framework, which makes it fairly easy to add additional encoding formats/codecs in future.
You can install thoggen as follows:
$ sudo apt-get install thoggen
Fig.06: Thoggen in action
Fig.06: Thoggen in action

=> Download thoggen

Other Tools and Back-ends

=> You need to install various libraries to use the above mentioned tools such as (yum or apt-get commands will install them automatically for you):
  • libdvdcss2 - Simple foundation for reading DVDs - runtime libraries.
  • libdvdnav4 - DVD navigation library.
  • libdvdread4 - library for reading DVDs.
=> mencoder - Personally, I use mencoder to rip my DVDs into .avi files as follows:
mencoder dvd://2 -ovc lavc -lavcopts vcodec=mpeg4:vhq:vbitrate="1200" -vf scale -zoom -xy 640 -oac mp3lame -lameopts br=128 -o /nas/videos/my-movies/example/track2.avi
Please note that AcidRip, is a graphical frontend for mencoder.
=> VLC - Yes, VLC can rip DVDs too.
=> Transcode is a suite of command line utilities for transcoding video and audio codecs, and for converting between different container formats. Transcode can decode and encode many audio and video formats. Both K9Copy and dvd::rip are a graphical frontend for transcode.
=> Wine - It is an open source software for running Windows applications on other operating systems. You can use popular MS-Windows application such as DVDFab to rip encrypted DVD's and DVD Shrink to shrink them to smaller size. I do not *recommend* and encourage this option as it goes against the FOSS philosophy. The following screenshot based on trial version of DVDFab:
Fig.07: Running DVDFab under Wine v1.2.2
Fig.07: Running DVDFab under Wine v1.2.2

See also:

Have a favorite Linux DVD ripper software or ripping tip? Let's hear about it in the comments below.

Entradas populares de este blog

Ultrastar Deluxe

El Karaoke para Linux La llegada de la Navidad significa reuniones con familiares y amigos, lo que nos lleva a buscar formas de entretenimiento. Una de ellas es el karaoke , y como no podría ser de otra manera en GNU/Linux tenemos nuestra opción Open Source, se trata de UltraStar Deluxe (para mí la mejor opción), que está basado en el primer Ultrastar aunque bastante más completo y fácil de usar. Esta aplicación es un clon libre de Singstar con el que podrás cantar cualquier canción e incluso crear la tuya propia. Si estáis interesados en instalarlo puedes añadir el repositorio para Ubuntu o bajarlo desde la página oficial en caso de usar otra distribución. sudo add-apt-repository ppa:tobydox/ultrastardx sudo apt-get update sudo apt-get install ultrastar-deluxe Una vez instalado sólo quedará añadir canciones . Como no podía ser de otra manera, existe una comunidad muy activa que nos proporciona gran cantidad de material listo para ser usado, una de ellas es Ultrastar

Descargar Packet Tracer 5.2 [Windows y Linux]

Packet Tracer 5.2 [Windows y Linux] Packet Tracer es la herramienta de aprendizaje y simulación de redes interactiva para los instructores y alumnos de Cisco CCNA. Esta herramienta les permite a los usuarios crear topologías de red, configurar dispositivos, insertar paquetes y simular una red con múltiples representaciones visuales. Packet Tracer se enfoca en apoyar mejor los protocolos de redes que se enseñan en el currículum de CCNA. Este producto tiene el propósito de ser usado como un producto educativo que brinda exposición a la interfaz comando – línea de los dispositivos de Cisco para practicar y aprender por descubrimiento. Packet Tracer 5.2 es la última versión del simulador de redes de Cisco Systems, herramienta fundamental si el alumno está cursando el CCNA o se dedica al networking. En este programa se crea la topología física de la red simplemente arrastrando los dispositivos a la pantalla. Luego clickando en ellos se puede ingresar

Control PS3 en Debian, Ubuntu

INSTALAR EL CONTROL DE PLAY STATION 3 EN GNU / LINUX. EN LAS DISTRIBUCIONES DEBIAN 6.0 SQUEEZE, DEBIAN WHEEZY (TESTING), LINUX MINT DEBIAN EDITION, LINUX MINT, GUADALINEX, UBUNTU. Les voy a decir como conectar su control de Play Station 3 en Debian por medio de un cable USB, personalmente lo he probado en Debian 6.0 Squeeze (estable) y Debian Wheezy (testing), no lo he probado en Linux Mint Debian Edition (LMDE), pero no tendría porque no funcionar. En el caso de Ubuntu y sus derivadas supongo que también debería funcionar, no lo he probado porque no uso dicha distro, pero los comandos los tome de un tutorial para ella, no es “copy and paste” , solo copie los comandos, el resto es de mi experiencia personal. NOTA PARA USUARIOS DE LINUX MINT, GUADALINEX Y UBUNTU: Los comandos que voy a poner son para Debian y Linux Mint Debian Editon, para el caso de Ubuntu y derivados ya saben que los comandos como root se ejecutan con “sudo”. Además creo q